Application
HMK® R799 is a special ready to use stripper/thinner for cleaning and removing wax coatings, sealants and impregnators. Small areas can be treated and renovated quickly and easily. HMK® R799 also removes oil and fat from natural and artificial stone and can be used on tools and equipment. Polished surfaces will not be damaged by HMK®R799.For removing sealants and impregnators on larger areas we recommend the use of HMK® R154 Stripper-Stain Remove.
Instructions
Protect adjacent surfaces and ensure adequate ventilation. If under floor heating exists, switch it off and allow the surface to cool. Working on a small area at a time, apply a generous coat of HMK R799 undiluted onto the surface using a stiff brush, scrubbing brush or suitable pad and work into the surface. Leave it for a short time, but do not allow to dry, and scrub the area again vigorously. Immediately remove the residue with a colorless cloth or paper towel and wipe the surface dry. If patches remain untreated after drying, repeat the treatment as necessary. After treatment scrub the treated area using HMK R155 Intensive Cleaner-acid fee diluted approx 1:10 with clean water and remove the residue. Rinse the surface thoroughly with clean water to complete the procedure.
Warning
Chemical product. Contains naphtha, petroleum product. Flammable. Keep away from heat and flame. Harmful or fatal if swallowed or inhaled. Avoid eye/skin contact and breathing vapour or mist. If exposed, wash/flush with water and seek medical attention immediately. Keep out of the reach of children. Use with adequate ventilation.
Testing
Always test the product in an inconspicuous area to evaluate suitability, coverage and performance. Do not use the product in temperatures below 12 and above 25°C. Store in cool place. Keep lid tightly closed.